The micro channel zinc coated aluminum pipe is mainly used in various air conditioning systems that adopt new type of environmental refrigerants. As a new type of environmental protection refrigerant, the parallel flow microchannel heat exchanger is produced as a new type of environmental protection refrigerant. Compared with the traditional copper tube and aluminum tube coil exchanger,
parallel flow aluminum tube with a zinc coating has four outstanding advantages: environmental protection, energy saving, simultaneous interpreting and energy saving.
First, protect the environment: use new environmental protection refrigerant to replace the original refrigerant which has great harm to the environment, greatly reduce the damage to the atmospheric ozone layer, and eliminate the greenhouse effect
Second, improve energy efficiency: with the same refrigeration efficiency, its energy efficiency can be increased by more than 30%
Third, save energy: improve energy efficiency, reduce weight, significantly reduce energy consumption
The fourth advantage is to reduce the cost: the cost of manufacture and use is greatly reduced.
The aluminum tube is galvanized. What is the thickness of zinc layer to extend the service life of aluminum tube?
The width of cross section of microchannel zinc spraying aluminum flat pipe is generally 10-30 mm, the height of cross section is generally 1.0-4.0 mm, the wall thickness is about 0.16-0.35 mm, the number of holes is 5-40, the length is generally less than 600 mm (the length of commercial air conditioner is up to 5 m), and the outer surface is sprayed with about 8-12 g / m2 zinc.
parallel flow aluminum tube with a zinc coating can be used in room air conditioning, commercial air conditioning and other professional heat exchange systems. Especially in the room and similar use of air conditioning system, refrigeration and refrigeration system, refrigeration and dehumidification air conditioning system, heat pump heating and water cooling / heating air conditioning system, it industry computer cooling module, equipment cooling system.
