News

Customized 6063 T6 color anodized aluminum tube from Chalco
2022-04-22 17:18

Introduction of customized 6063 T6 color anodized aluminum tube from Chalco

Chalco 6063 aluminum alloy is widely used in building profiles, irrigation pipe tube, and profiles for vehicles, benches, furniture, lifts, fences, etc. 6063 aluminum alloy has high wind pressure resistance, assembly performance, corrosion resistance and decorative performance, and the requirements for the comprehensive performance of aluminum alloy profiles are much higher than the industrial profile standards.

Customized 6063 T6 color anodized aluminum tube

Features of customized 6063 T6 color anodized aluminum tube from Chalco

  • 1. The main alloying elements of Chalco 6063 aluminum tube are magnesium and silicon, which have excellent processability, excellent weldability, extrudability and electroplating, good corrosion resistance, toughness, easy to polish, color film, and anode After oxidation treatment, the surface presents a gorgeous color and many other advantages.
  • 2. Chalco 6063 aluminum tube is a low alloyed Al-Mg-Si series high plasticity alloy. 6063 aluminum alloy has heat treatment strengthening, high impact toughness, insensitivity to notch, good thermoplasticity, and can be extruded into various profiles with complex structure, thin wall and hollow at high speed. Chalco 6063 aluminum tube has excellent welding performance and corrosion resistance, and has no tendency to stress corrosion cracking. Among the heat-treated reinforced aluminum alloys, Al-Mg-Si alloys are the only alloys that have not found stress corrosion cracking. Chalco 6063 aluminum tube has a very smooth surface after processing and is easy to anodize and color.
Chemical Composition of 6063 color anodized aluminum tube from Chalco
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ga V Ti Other Min.Al
6063 0.2-0.6 0.35 0.10 0.10 0.45-0.9 0.10 - 0.25 - - 0.10 0.15 Remainder
 
Physical Property of 6063 T6 color anodized aluminum tube from Chalco
Alloy Temper Wall thickness
/mm
Room temperature Test Result
Tension Strength/MPa Yield Strength/MPa Elongation/%
A50mm A
Not less than
6063 T6 all 205 170 10 9
T5 ≤25.00 175 130 6 8

About Us
Contact Us
Tel:+86-371-55689814
Fax:+86-371-55686475
Mobile:0086-13673369503
Email:info@chalcoaluminum.com
Skype: chalcoaluminum