Introduction of
custom drawn aluminum tubing
The
custom drawn aluminum tubing is a plastic processing method that applies tensile force to the aluminum tube blank to pass through the die hole to obtain products with the same cross-sectional size and shape as the die hole. Drawing is one of the main production methods of aluminum tubes. Hollow material drawing is a basic method including the drawing of round tubes and heterosexual tubes. When drawing, the core head is not placed inside the billet, that is, the coreless head is drawn, mainly for the purpose of reducing the outer diameter of the pipe billet. The wall thickness of the pipe after drawing generally changes slightly, and the wall thickness either increases or decreases. The air-drawing method is suitable for the drawing of small-diameter pipes, heterosexual pipes and coils, as well as the reduction and shaping of small diameters.
Henan Chalco can produce corresponding molds to produce
custom drawn aluminum tubing of different specifications according to the customer's requirements for the diameter, wall thickness and length of aluminum tubes.
The specifications of the
custom drawn aluminum tubing are as follows:
Outer diameter: 3mm-120mm,
Accuracy: 0.015mm
Equipment capacity: ≥200 tons per month
The alloy temper of
custom drawn aluminum tubing
Alloy: 1050, 1060, 1070, 2219, 2618, 2B50, 2A50, 2A70, 2A80, 2D70, 2A14, 2014, 2A11, 2A12, 2024, 3A21, 4032, 5A90, 5210, 5A02, 5A03, 5083, 5A05, 5A06, 6A02, 6061, 6082, 7A04, 7B04, 7A09, 7075, 7049, 7049A, 7050, 7A19, 7A10, etc.
Available temper: O, F, H112, T3, T4, T5, T6, etc.
Executive standards: GBn223, YS / T479, ASTM B247, AMS series standards, etc.
Application of
custom drawn aluminum tubing
Custom drawn aluminum tubing can be widely used in aviation, automotive, medical equipment, OA, optical and electronic consumable fields.
