HOME > News > Aluminum microchannel tube

Aluminum microchannel tube
2021-12-31 10:16:00

Aluminum microchannel tube: aluminum and aluminum alloy capillary tubes, generally speaking, are pure aluminum tubes, alloy aluminum tubes and other special aluminum tubes with an outer diameter of 0.5mm~10mm and an inner diameter of 0.3mm~9.8mm.

Aluminum microchannel tube

Aluminum microchannel tube

basic introduction

Aluminum and aluminum alloy capillary tubes are generally pure aluminum tubes, alloy aluminum tubes and other special aluminum tubes with an outer diameter of 0.5mm~10mm and an inner diameter of 0.3mm~9.8mm.

Scope of application

Advanced-suitable for aluminum microchannel tubes used in household refrigerators, electric freezers, high-precision meters and other industrial sectors.
Higher level-suitable for aluminum and aluminum microchannel tube used in high-precision instruments, meters, and electronics industries.
Ordinary grade-suitable for aluminum and aluminum microchannel tube used in industrial sectors such as instruments and electronics with general precision.
 Aluminium tube is a kind of non-ferrous metal tube, which refers to a metal tubular material that is made of pure aluminum or aluminum alloy by extrusion processing to be hollow along its full length in the longitudinal direction. It can have one or more closed through holes, with uniform wall thickness and cross section, and delivered in a straight line or in a roll. It is widely used in industries such as automobiles, ships, aerospace, aviation, electrical appliances, agriculture, electromechanical and household appliances.
It is a kind of high-strength hard aluminum that can be strengthened by heat treatment. It has moderate plasticity under annealing, fresh quenching and hot conditions. It has good spot welding weldability. Aluminum tubes have a tendency to form intergranular cracks when gas welding and argon arc welding are used; aluminum tubes The machinability is good after quenching and cold work hardening, but poor in the annealed state. The corrosion resistance is not high, and anodizing treatment and painting methods are often used, or the surface is coated with aluminum layer to improve the corrosion resistance. It can also be used as a mold material.

Contact Us
Mobile:86 17344894490
Email:info@chalcoaluminum.com