Aluminum alloy 6063-t6 hollow tube is mainly composed of magnesium and silicon. It has the advantages of processability, excellent extrusion and electroplating, good corrosion resistance and toughness, easy polishing and coloring film, and excellent anodizing effect. It is a typical extrusion alloy.
6063 aluminum alloy profiles are widely used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, lifts, fences and so on, because of their good plasticity, moderate heat treatment strength, good performance and gorgeous color after anodizing.
Alloy grade aluminum alloy brand and status: 6063-T6
Tensile strength: 230rm/mpa
Yield strength: 190rp0.2/mpa
Elongation: 5% Hardness: 80hbw α 6063 is a low alloying Al Mg Si high plasticity alloy. The advantages are as follows:
1. heat treatment is strengthened, and the impact toughness is high for notch.
2. the properties and corrosion resistance are excellent, and there is no tendency of stress corrosion cracking. In the heat treatment reinforced aluminum alloy, the Al Mg Si alloy is the alloy without stress corrosion cracking.
3. the surface after processing is very smooth and easy to anodize and stain. The disadvantage is that after quenching, if it is parked at room temperature for a period of time, it will have adverse effect on strength (parking effect) on aging.
Company hard aluminum alloy product category:
Aluminum pipe varieties: extruded aluminum pipe, seamless aluminum pipe, aluminum forging.
Supply status: T6, t651, h112, O.
Extruded tubes: outer diameter Φ 12mm~350mm。
Seamless pipe: outer diameter Φ 20mm~600mm
The aluminum pipe with large diameter is customized according to the customer's requirements, and the delivery period is fast.
