Aluminum pipe for Compressed Air system
2019-08-26 18:16:00
1. Introduction of Aluminum pipe for Compressed Air system
Product size: from DN20 to DN200 1/2"~8"
Product pressure: ≤16bar
Product material: full range of aluminum alloy pipes
Operating temperature: from -30 ° C to 80 ° C
Applicable fluid: compressed air, vacuum inert gas (oxygen, nitrogen, carbon dioxide), etc.
Vacuum degree: 98.7% (absolute pressure 13 mbar)
Product standard: in line with GB/T4437.1-2015 standard
Product packaging: woven bag / carton / wooden box / customer specified
Place of Origin: Zhengzhou, Henan Province Easy installation, corrosion resistance, no leakage
Product color: gray, blue, yellow.
2, The product description of Aluminum pipe for Compressed Air system:
The compressed air piping system in the traditional use causes many problems due to its own defects: large installation engineering, difficulty in improving expansion, unstable air circulation, high pressure drop, gas leakage, corrosion of the inner wall of the pipeline, and thus affecting product quality.
Aluminum pipe for Compressed Air system adopts fluorocarbon coating (polyvinylidene fluoride (PVDF). Excellent anti-corrosion performance - benefit from excellent chemical inertness, chemical resistance of acid film, alkali, salt and other chemical solvents Provides a protective barrier for the substrate; the film is tough – high surface hardness, impact resistance, buckling resistance, and good wear resistance, showing excellent physical and mechanical properties. Long weather resistance – the coating contains a large amount of The F--C key determines its superior stability, no powdering, no fading, and a service life of up to 20 years.
3, The advantages of Aluminum pipe for Compressed Air system:
1) From research and development, raw materials to system design, installation services, all-round help customers solve the worries in the gas delivery process. The full-performance quick-installing pipeline system has the characteristics of quick installation, corrosion resistance, energy saving, 100% recyclable and reusable, beautiful appearance and compatibility. It is suitable for the transportation of compressed air, vacuum, inert gas, water and other fluids. The high-quality fluid is sent from the gas-producing end to the use end to ensure the safety of the downstream equipment and the continuity and stability of the production process.
Product features: Smooth inner surface, full bore, internal diversion and other optimized design, reducing the air flow resistance, reducing the pipeline pressure drop to a low level, reaching the standard flow, thus reducing the operation caused by the pressure drop The cost is up to 5%. (Each 1 bar reduction in pressure drop can reduce the energy consumption of 7% of installed power).
2) Anodic oxidation An article in which a metal or an alloy is used as an anode, and an oxide film is formed on the surface by electrolysis. The metal oxide film changes the surface state and properties, improves corrosion resistance, enhances wear resistance and hardness, and protects metal surfaces. The aluminum of the anode or its alloy is oxidized, and a thin layer of aluminum oxide is formed on the surface, and the thickness thereof is 5 to 30 μm, and the hard anodized film is 25 to 150 μm. Aluminized aluminum or its alloy improves its hardness and wear resistance up to 250-500 kg/mm 2 , good heat resistance, hard anodized film melting point up to 2320K, excellent insulation, and resistance to attack The wearing voltage is up to 2000V, which enhances the corrosion resistance and does not corrode in the salt fog of ω=0.03NaCl for several thousand hours.
4, The features of Aluminum pipe for Compressed Air system:
The Aluminum pipe for Compressed Air system has the characteristics of corrosion resistance, energy saving (smooth friction coefficient of the inner wall), firmness, durability, lightness and beauty, as follows:
1) Easy installation, fast and convenient
Modular production, on-site installation is convenient and fast, no need to weld, and at the same time, it is only necessary to simply replace the quick-change joint when adding new gas points or moving gas points in the later stage, saving labor costs in the later stage.
2) Clean delivery
Specially shaped alloy aluminum pipe, never corroded, clean and clean, ensuring that the air quality between the processing equipment and the point of use will not cause secondary pollution due to the pipeline, prolonging the service life of the pipeline.
3) Energy efficient
Specially designed products, low friction coefficient on the inner wall, reducing energy consumption; reliable sealing system ensures that the pipeline system will not leak and reduce operating costs. The alloy aluminum pipe system will gradually replace the traditional carbon steel and stainless steel pipes, and it will transport clean gas fluids cheaper.
5, The usage of Aluminum pipe for Compressed Air system:
The Aluminum pipe for Compressed Air system is suitable for various industries such as mining, wood, sugar, chemical, power plant, cement, paper, ship, smelting, machinery, manufacturing and processing.
Aluminum pipe for Compressed Air system About 10,600,000 results
Aluminum Compressed Air Piping About 960,000 results
