The Product introduction of
6061 Aluminum Tube manufacturer and supplier
Henan Chalco Aluminum is a
6061 Aluminum Tube manufacturer and supplier. The
6061 aluminum tube is a heat-treated and reinforced alloy with good formability, weldability and machinability. It also has medium strength and can be maintained after annealing. Good operability.
Henan Chalco Aluminum is a
6061 Aluminum Tube manufacturer and supplier. The main alloying elements of our 6061 aluminum tubes are magnesium and silicon, and form Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; sometimes a small amount of copper or zinc is added to increase the strength of the alloy without significantly reducing the corrosion resistance; there is still a small amount in the conductive material. Copper to offset the adverse effects of titanium and iron on conductivity; zirconium or titanium can refine grains and control recrystallized structure; in order to improve machinability, lead and antimony can be added. The Mg2Si is solid-dissolved in aluminum, which gives the alloy an artificial age hardening function.
The product chemical composition of
6061 Aluminum Tube manufacturer and supplier
Cu : 0.15 to 0.4
Mn: 0.15
Mg: 0.8 to 1.2
Zn : 0.25
Cr : 0.04 to 0.35
Ti : 0.15
Si: 0.4 to 0.8
Fe : 0.7
Al: balance
The product corresponding brand of
6061 Aluminum Tube manufacturer and supplier
National Standard: 6061 (LD30) GB/T 3190 - 2008
ISO: AlMg1SiCu ISO 209.1-1989
Japanese standard: A6061 JIS H4000-1999 JIS H4040-1999
Non-standard: 65032 IS 733-2001 IS 737-2001
EN:EN AW-6061/AlMg1SiCu EN 573-3-1994
German standard: AlMgSi1Cu/3.3211 DIN 1725.1-1986/W-Nr
Standard: 6061 (A-GSUC) NF A50-411 NF A50-451
British Standard: 6061 (N20/H20) BS 1470-1988
American Standard: 6061/A96061 AA/UNS
