Introduction to
6005 aluminum pipe tube
6005 aluminum pipe tube is Al Mg antirust aluminum. The performance of 5182 aluminum pipe is similar to 5A02, but the weldability is better than 6005 due to the slightly higher magnesium content than 6005 and the addition of a small amount of silicon. The weldability of gas welding, argon arc welding, spot welding and roll welding for
6005 aluminum pipe tube is very good, and there is no big difference in other properties.
Characteristics of
6005 aluminum pipe tube
6005 aluminum pipe tube belongs to Al Mg alloy, which is widely used, especially in construction industry. It is the most promising alloy. It has good corrosion resistance, weldability, cold workability and medium strength.
Chemical composition of
6005 aluminum pipe tube
Aluminum: allowance
Zinc: ≤ 0.10
Chromium: ≤ 0.10
Silicon: 0.60-0.9
Iron: 0.000-0.350
Manganese: ≤ 0.10
Magnesium: 0.4-0.60
Titanium: ≤ 0.10
Copper: ≤ 0.10
The application of
6005 aluminum pipe tube
6005 aluminum pipe tube Al Mg series alloy is the most widely used antirust aluminum, which has high strength, especially fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment, good plasticity in semi cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, poor machinability and polishing.
6005 aluminum pipe tube is mainly used for low load parts that require high plasticity and good weldability and work in liquid or gas medium, such as mailbox, gasoline or lubricating oil conduit, various liquid containers and other small load parts made by deep drawing.
